 |
 |
 |
|
3M Carton Sealing Tape - 1.8 Mil General Purpose -
Acrylic Based adhesive. Designed for utility type applications on
light to medium-weight boxes. UV protected to prevent yellowing in
sunlight or florescent lighting. Tensile strength is 21 pounds per inch
of width.
This General Purpose tape has good closure for light weight boxes with minimal distribution hazards.
- Tartan™
General Purpose Box Sealing Tape
305
Technical Data April, 2006
Typical Physical
Properties
Note: The following technical information and data should be considered representative
or typical only, and should not be used for specification purposes.
ASTM Test Method
Adhesion to Steel: 20 oz./in. width (22 N/100 mm width) D-3330
Tensile Strength:
Cross Direction: 43 lbs./in. width (753 N/100 mm width) D-3759
Elongation at Break: 125% D-3759
Thickness - Backing: 1.0 mil (0.025 mm) nominal D-3652
Total: 1.8 mil (0.046 mm) nominal D-3652
Construction Backing Adhesive Colors
Biaxially oriented Pressure sensitive acrylic; requires no Clear and tan
polypropylene film moisture, heat or solvent for activation.
Clear Tan
Standard Widths: 48 mm and 72 mm 48 mm
Core Size (ID): 3 in. 3 in.
Lengths: 50 m, 100 m and 914 m 100 m
Available Sizes
Storage Conditions Store in a clean, dry place. Temperature of 40-80°F (4-26°C) and 40 to 50% relative
humidity are recommended.
Tartan™ General Purpose Box Sealing Tape
305
Printed in U.S.A.
©3M 2006 70-0710-0294-6 (4/06)
Recycled Paper
40% pre-consumer
10% post-consumer
3
Industrial Business
Industrial Adhesives and Tapes Division
3M Center, Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (fax)
www.3M.com/industrial
All statements, technical information and recommendations contained in this document are based upon
tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect
the use and performance of a 3M product in a particular application, including the conditions under
which the product is used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the
user’s method of application.
Product Use
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual
products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the
product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product
is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the
warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to
replace the product or refund the purchase price.
Warranty and
Limited Remedy
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.
Limitation of Liability
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001:2000 standards.
|
|
|
 |
|
 |
|
|
|